Ming sells each reference once, in a run that is not repeated, and on 19 September 2026 five of the seven models in the data had sold out and had the price removed from the page. The two that still showed one were the 37.11 Odyssey at CHF 5,500 and the 57.04 Phoenix at CHF 6,250, both excluding taxes and both on a waitlist.
Checked 20 September 2026 · list prices on the maker's site that day unless marked street
Ming was founded in 2017 by Ming Thein, a photographer and designer, and it is run from two places: design, engineering and final quality control in Kuala Lumpur, production and assembly in La Chaux-de-Fonds, per the about page. It sells direct from ming.watch and through a short list of authorised retail partners named on the site, with a 2 year limited mechanical warranty from delivery. Prices, when a page shows one, are in Swiss francs excluding taxes. The house method is to put the lume or the indices in the crystal rather than on the dial, and to sell a run once.
Three things the spec sheets settle. Every movement but one is a Sellita modified and marked for the brand: the SW210.M1 hand-wound, the SW300.M1 automatic, the SW330.M2 GMT and the SW562.M1 hand-wound chronograph. The exception is the 20.01, whose Agengraphe was made by Agenhor for Ming. Every case has sapphire front and rear with AR on both sides, Super-LumiNova X1 and a 20 mm lug, except the 20.01 at 22 mm. There are two footprints: the 37 series at 38 mm and 44.5 mm lug-to-lug, the 57 series at 40 mm and 47.8 mm; the 20.01 is 41.5 mm in titanium with no lug-to-lug published. Water resistance runs from 50 m on the 20.01 and 100 m on the 37.06, 57.04 and 57.05 to 300 m on the 37.11 and 600 m on both 37.09s.
Prices need a paragraph. Once a run sells out the archive page keeps the specs and empties the price slot, leaving only the excluding-taxes suffix, and that is what the 37.06, both 37.09s and the 57.05 showed on 20 September 2026. A search snippet putting the Bluefin at CHF 4,950 was not adopted because no maker page shows it. The 20.01 Series 2 page shows nothing; the CHF 43,500 in the table is a Series 3 figure from a search result, not fetched from the maker, and should be read as a marker of the tier rather than a price. Two rows still carry the brand's own number, and they are the ones a buyer can join a waitlist for.
Founded2017
BasedKuala Lumpur, Malaysia (design, engineering, final QC) and La Chaux-de-Fonds, Switzerland (production and assembly)
AssembledProduction and assembly in Switzerland; design, engineering and final quality control in Malaysia (about-us page)
MovementsSellita for MING SW300.M1 automatic, Sellita for MING SW330.M2 automatic GMT, Sellita for MING SW562.M1 hand-wound chronograph, Sellita for MING SW210.M1 hand-wound
SoldDirect (ming.watch) plus a short list of authorised retail partners named on the site
Warranty2-year limited mechanical warranty from delivery (FAQ; product pages say '2 years against defects')
Read the table by reference number. 37 is the 38 mm case, in steel or titanium, and holds the dress hand-wound, the two 600 m divers and the titanium GMT. 57 is the 40 mm steel case and holds the GMT and the chronograph. 20 is the Agengraphe, and belongs to a different conversation. The unpriced rows sort first because the table has nothing to sort them by; the entry for each says what the page showed and where any figure came from.
Ø38 mm · hand wound · 100 m · Shapiro dial · waitlist · no price shown
Ming 37.06 Lightning (MING x J.N. Shapiro)
38 × 44.5 mm · ref 40 × 47
MovementSellita for MING SW210.M1 hand-wound, ~42h
Case38 mm
Lug to lug44.5 mm
Thickness10.9 mm
Lug width20 mm
Water resistance100 m
CrystalDomed sapphire front and rear, double-sided AR
BezelFixed
LumeSuper-LumiNova X1 hands; HyCeram indices inside top crystal
Case material316L steel, polished-brushed
Price—
The collaboration with J.N. Shapiro of Los Angeles, and a row with no price because the archive page showed none on 20 September 2026, only the excluding-taxes suffix: a grade-2 titanium dial hand engine-turned by Shapiro and heat-coloured by Ming Thein, in the 38 mm steel case, 44.5 mm lug-to-lug, 10.9 mm thick, 100 m, domed sapphire front and rear with HyCeram indices inside the top crystal, on a Sellita SW210.M1 hand-wound with about 42 hours. Orders were paused with the waitlist open; delivery slots were filled through late 2027. Atelier Wen's Ancestra puts a hand-hammered silver and enamel dial on a Pequignet at $5,850, 38 mm and 11.3 mm, and shows the price.
The 600 m Ming in the 38 mm case, sold out with deliveries complete and marked as not to be produced again; the price was removed from the page, and a search snippet claiming CHF 4,950 was not adopted, so the row is unpriced. A Sellita SW300.M1 automatic with about 50 hours, 38 mm, 44.5 mm lug-to-lug, 12.8 mm thick, domed sapphire front and rear with double AR. Against the Uni it is the same case, movement and rating, differing in finish and strap. Vertex's M60 AquaLion D is the other 600 m watch in this data, GBP 2,375 before VAT at 40 mm and 14 mm; the Ming is 2 mm smaller and 1.2 mm thinner.
Ø38 mm · automatic · 600 m · 600 m · sold out · no repeat
Ming 37.09 Uni
38 × 44.5 mm · ref 40 × 47
MovementSellita for MING SW300.M1 automatic, ~50h
Case38 mm
Lug to lug44.5 mm
Thickness12.8 mm
Lug width20 mm
Water resistance600 m
CrystalDomed sapphire front and rear, double-sided AR; lumed indices inside top crystal
BezelFixed
LumeSuper-LumiNova X1 (indices on crystal and sapphire dial, orange highlights)
Case material316L steel, matte-brushed, DLC
Price—
The second 37.09, and on the check date the home page still listed it In Stock while the product page said sold out with deliveries complete; the product page wins, and its price slot was empty. The sheet matches the Bluefin: SW300.M1 automatic, about 50 hours, 38 mm, 44.5 mm lug-to-lug, 12.8 mm thick, 600 m, with lumed indices inside the top crystal and Super-LumiNova X1 on a sapphire dial, in matte-brushed steel with DLC, on moulded FKM rubber. The DLC and the rubber are what separate it from the Bluefin. Tudor's Pelagos 39 is $5,625 at 39 mm, 11.8 mm and 200 m; Sinn's U50 is $3,440 at 500 m. Neither puts the indices in the glass.
MovementSellita for MING 330.M2 automatic, 25 jewels, ~50h, 4Hz
Case40 mm
Lug to lug47.8 mm
Thickness10.33 mm
Lug width20 mm
Water resistance100 m
CrystalBox sapphire front and rear, double-sided AR; top crystal laser-engraved with luminous material
BezelFixed, triple-step lugs
LumeSuper-LumiNova X1 blue (hands), blue/orange 24h ring, red DST indicator
Case material316L steel
Price—
The GMT in the 40 mm case, an edition of 200, sold out with production complete and no price on the page: a Sellita for MING 330.M2 automatic GMT, about 50 hours, 40 mm, 47.8 mm lug-to-lug, 10.33 mm thick, 100 m, box sapphire front and rear with the top crystal laser-engraved with luminous material, a blue and orange 24-hour ring and a red DST indicator. Against the 37.11 Odyssey it is 2 mm larger, 2.27 mm thinner, rated to 100 m rather than 300, and unpriced where the Odyssey shows CHF 5,500. Zelos's Spearfish Dual Time is $2,199 in titanium at 40 mm, 47 mm and 10 mm on a Sellita SW300 with a module.
Ø38 mm · automatic · 300 m · CHF 5,500 · CHF 5,500 · titanium · 300 m
Ming 37.11 Odyssey (bracelet)
38 × 44.5 mm · ref 40 × 47
MovementSellita for MING SW330.M2 automatic GMT, ~50h
Case38 mm
Lug to lug44.5 mm
Thickness12.6 mm
Lug width20 mm
Water resistance300 m
CrystalDomed sapphire front and rear, double-sided AR
BezelInternal bidirectional 24h rotating dial
LumeSuper-LumiNova X1 blue/orange emission on sapphire dial; gradient hands
Case materialGrade 2 titanium, brushed, 42.5g head
PriceCHF 5,500 on the maker's site (no US price shown)
One of the two Mings with a price on the page, CHF 5,500 excluding taxes, sold out with a waitlist: a Sellita SW330.M2 automatic GMT, about 50 hours, with an internal bidirectional 24-hour rotating dial, in brushed grade 2 titanium, 38 mm, 44.5 mm lug-to-lug, 12.6 mm thick, 300 m, domed sapphire front and rear, on the universal titanium bracelet. It is the 37.09 case in titanium, 0.2 mm thinner, with a GMT and 300 m in place of 600. Longines' Spirit Zulu Time is $3,550 at 39 mm on the ETA-based L844; Serica's 8315-1 is $2,450 with a COSC certificate at 12.3 mm. The Ming's case for the money is the titanium, the 300 m and the dial.
Ø40 mm · hand wound · 100 m · CHF 6,250 · CHF 6,250 · chronograph · waitlist
Ming 57.04 Phoenix (FKM strap)
40 × 47.8 mm · ref 40 × 47
MovementSellita for MING SW562.M1 hand-wound chronograph, ~60h
Case40 mm
Lug to lug47.8 mm
Thickness11.85 mm
Lug width20 mm
Water resistance100 m
CrystalSapphire front and rear, double-sided AR; laser-cut indices in top crystal
BezelFixed, three-step lugs
LumeSuper-LumiNova X1 hands and minute counter
Case material316L steel, polished-brushed
PriceCHF 6,250 on the maker's site (no US price shown)
The chronograph, and the dearer of the two priced rows at CHF 6,250 excluding taxes, sold out with a waitlist offered: a Sellita SW562.M1 hand-wound chronograph, 40 mm, 47.8 mm lug-to-lug, 11.85 mm thick, 100 m, sapphire front and rear with the indices laser-cut into the top crystal. The high-end ranking places Ming fifth on this watch. Against the 57.05 Comet it is the same case 1.52 mm thicker with a chronograph in place of the GMT. Massena LAB's Uni-Racer is $3,495 on a Sellita SW510 M at 39 mm and 9 mm; Farer's Libre is $2,095 on the SW510M; both are two-pusher hand-wounds, and the Ming is the customised one with the lume in the glass.
Ø41.5 mm · hand wound · 50 m · Agengraphe · sold out · Series 3 price
Ming 20.01 Series 2
MovementAgenhor for MING Agengraphe Cal. 6361.M1 manual-winding chronograph
Case41.5 mm
Lug to lug—
Thickness14.2 mm
Lug width22 mm
Water resistance50 m
Crystaldomed sapphire front and rear, AR both sides
Bezelfixed
LumeSuper-LumiNova X1 hands, HyCeram ceramic Super-LumiNova dial fill
Case materialgrade 5 titanium, 34 parts
Price—
The reference point above everything else, and a row whose figure needs a caveat: the Series 2 page shows no price, and the CHF 43,500 in the table is the Series 3 figure from a search result, not fetched from the maker. Agenhor's Agengraphe Cal. 6361.M1, a manual-winding chronograph, in a 34-part grade 5 titanium case, 41.5 mm, 14.2 mm thick, 22 mm lug, 50 m, with HyCeram lume filling the dial. Lug-to-lug is not published; the run is sold out and will not be repeated. Formex's Aria is $7,900 on the FX01 manufacture micro-rotor at 40 mm and 6.9 mm; Breitling's Navitimer B01 is $10,300 at 41 mm. Neither is an Agengraphe, and that is the argument.
Ming is for the buyer who wants a Swiss-assembled watch with the lume in the crystal and a Sellita made over for one brand, and who is prepared to join a waitlist and pay CHF 5,500 to 6,250 before taxes when a run opens. The 37 series at 38 mm and 44.5 mm lug-to-lug suits a 6.25 to 7 inch wrist; the 57 series at 40 mm and 47.8 mm wants 6.75 inches or more; the 20.01 at 41.5 mm and 14.2 mm is a different object. Look elsewhere if you want to buy this month, since Formex, Serica and Monta hold stock at $2,085 to $2,550 with a certificate; if you want a price on every page, since five of seven Ming pages show none; or if you want a movement above a modified Sellita at the same money, since Formex's Aria is $7,900 on a manufacture micro-rotor and Ophion's Vesper is EUR 3,975 on a Schwarz Etienne.
Where it sits against the field
At CHF 5,500 the Odyssey is a titanium 300 m GMT at 38 mm, and the GMTs it meets are Longines' Spirit Zulu Time at $3,550, Serica's 8315-1 at $2,450 with a COSC certificate, Monta's Skyquest at $2,435 with 300 m and Grand Seiko's Spring Drive SBGE285 at $8,900; the Ming is the smallest and the only one in titanium below the Grand Seiko's price. At CHF 6,250 the Phoenix is a hand-wound chronograph on a customised Sellita, priced above Massena LAB's Uni-Racer at $3,495, Farer's Libre at $2,095 and Sinn's 903 at $4,310, and below the manufacture chronographs from Breitling at $10,300. The two 37.09s at 600 m have one peer in this data, Vertex's M60 at GBP 2,375 before VAT, and it is 2 mm larger and 1.2 mm thicker. The high-end ranking puts Ming fifth for the calibres and marks it down for selling nothing twice.
Questions people ask
Where are Ming watches made?
Switzerland and Malaysia, and the about page says which part is where: production and assembly in La Chaux-de-Fonds, design, engineering and final quality control in Kuala Lumpur. The movements are Sellita calibres modified and marked for the brand (SW210.M1, SW300.M1, SW330.M2, SW562.M1), except the 20.01's Agengraphe, made by Agenhor for Ming. The warranty is 2 years from delivery.
How much does a Ming watch cost?
On 19 September 2026 the two pages still showing a price were the 37.11 Odyssey at CHF 5,500 and the 57.04 Phoenix at CHF 6,250, both excluding taxes and both sold out with a waitlist. The 37.06, both 37.09s and the 57.05 had sold out and their pages show no price; the 20.01 Series 2 shows none either, and the CHF 43,500 attached to it is a Series 3 search-result figure, not the maker's.
What is the difference between the Ming 37.09 Bluefin and the 37.09 Uni?
Finish and strap. Both are 38 mm, 44.5 mm lug-to-lug, 12.8 mm thick, 600 m, on a Sellita SW300.M1 automatic with about 50 hours, with sapphire front and rear. The Uni is matte-brushed steel with DLC on moulded FKM rubber with lumed indices inside the crystal and orange highlights; the Bluefin's page gives 316L steel without those details. Both are sold out, deliveries complete, not to be produced again, and neither shows a price.